Generator and Cooling-water Circulator	Application without a guide rail �@
Application with a guide rail	Application without a guide rail �A

Steel Thickness	High Speed
	Cable Length 10m	Cable Length 20m
4.5mm	1000〜1200mm/min	900〜1000mm/min
6mm	850〜950mm/min	700〜800mm/min
8mm	650〜750mm/min	550〜650mm/min
10mm	550〜650mm/min	450〜550mm/min
12mm	450〜550mm/min	350〜450mm/min

Output	30KVA
Frequency	10〜22KHｚ
Input Supply	AC200/220V　3φ　50/60Hz
High Frequency Generator	IGBT Inverter Type Air - Cooled
Output Control Method	PWM
Heating Coil	U Type (water - cooled)
Cable Length	10m（Max25m）
Heating Temp.	900℃
Application Thickness	6mmｔ〜
Heating Speed	1000mm/min × 2 lines
Total Weight	220ｋｇ

1. Reduced requirement for skilled workers easiness to handle and professional
　 result solves problem of technical conveyance and a lack of the skilled workers.
2. A couple of units can be operated by each worker.
　 Labor cost is planned to be cut down.
3. Two lines for gas burners can be heated simultaneously with a single set of the NETZ.
　 Substantial reduction in manhours and energy consumption.
4. Controlled heating and easy operation contribute to repeatability in working and
　 an improvement in quality.
5. No extraordinary heating, no influence upon metal properties and no increase in
　 stress level.
6. The heating coil is water-cooled but the H.F. generator itself is air-cooled and
　 then small-sized for on-site application.
7. Industrial accidents are prevented.
● Not hot nor noisy but safety working atmosphere.
● No toxic gas in case of a painted or primed surface.
● The minimum of the danger of a fire and the generation of smoke.
● No need of measures for the hard of hearing caused by the noise.
● No explosive accident caused by a gas leak.
● Less fatigue prevents accidents beforehand.

This system is to straighten steel sheet of the
deck or floor.
A gas burner has been used and has some problems
such as quality, cost, technical conveyance, and
accidents at work, which has been solved with the
high frequency induction heating method.